Effect of Aluminum and Iron Addition during Conditioning and Dewatering for Odor Control

WERF Report 03-CTS-9A

Currency:

Standard price: £29.00

Available as an ebook

Please purchase via www.iwaponline.comOpens in new window

Also part of Water Intelligence Online Digital Reference Library

Standard ePrice: £29.00

+ VAT

Access ebook

Author(s): Matthew J. Higgins

Publication Date: 10/03/2010

Pages: 60

Binding: Paperback

ISBN13: 9781843392842

eISBN: 9781780403540

Download book flyer Print page

The objectives of this research were to investigate the factors impacting the effectiveness of metal salts in reducing the production of volatile organic sulfur compounds (VOSCs) in biosolids, with the goal of developing recommendations for applying metal salt addition in the field for odor reduction.  The research examined a number of factors which could impact the effectiveness of metal salt addition which included chemical dosage, types of chemicals, location of the addition point, the shear applied to the solids, and different biosolids sources.  The results showed that metal salt addition can reduce VOSC production, but their effectiveness is especially impacted by the shear applied to the biosolids.  Greater amounts of shear resulted in greater dosages required to achieve VOSC reduction.  Comparison of different metals including, alum, polyaluminum chloride, sodium aluminate, ferric chloride, ferrous chloride, ferric sulfate, ferrous sulfate, zero-valent iron and magnesium chloride showed that all could reduce VOSC production, and some worked slightly better than others, but none were vastly superior to the others.  In special cases where a biosolids produced higher quantities of hydrogen sulfide, addition of iron based chemicals generally had lower hydrogen concentrations than aluminum based chemicals, likely due to iron-sulfide precipitation.  However, addition of sodium aluminate also reduced hydrogen sulfide, mainly due to the increased pH above which hydrogen sulfide volatilizes.  Little differences were found when comparing the chemical addition points during conditioning, either before, with, or after the polymer.  Addition directly to the cake was also effective.  The addition of metal salts can be applied to reduce the production of odorants, although it is difficult to predict the dosage that will be required without laboratory and possibly pilot testing.

Also available as part of your Water Inteligence Online subscription

Matthew J. Higgins

The latest from @IWApublishing

RT : A toilet is not just a toilet. It’s a life-saver, dignity-protector and opportunity-maker. We must expand access… https://t.co/6zcGwSx3Kp 6 hours 1 min ago
As the Development Congress in Colombo, Sri Lanka approaches, we are sharing our free article collection of… https://t.co/HXwJKcmPzk 9 hours 34 min ago
RT : Check the THEME: Integrated Water Resources Management and REGISTER - https://t.co/JmPKTKtoex https://t.co/x1iyTi8VFs 10 hours 51 min ago